A perfectly proportioned blend of high quality Portland Cement and dry, clean brick sand.
Uses
Use where the thickness of finished Concrete will not exceed 2 inches. (See Concrete Stone Mix for thickness greater than 2 inches).
Suggested Uses Are:
Concrete Floor Topping - Parging - Ramping - Filling Cracks - Laying Flagstone and Pavers - Grouting - Wall Repair - Filling Tree Cavities
Features and Technical Data
-
Pre-blended and ready to use - Just add water.
-
Backed by Independent Quality Control Tests.
-
IN 66 LB (30 KG) BAGS 56 PER SKID
Coverage
10 lbs of Concrete Sand Mix will cover 1 square foot to a thickness of about 1 inch. Preparation All surfaces should be clean and free of oil, gas, paint, grease, etc before applying Sand Mix.
Directions
Empty contents of bag into mixer or wheelbarrow. Add water to the Sand Mix, mixing as you go. Required water is about 31/2 quarts per 66lb bag. Too much water reduces the overall strength. Once mixed, pour the Sand Mix into the area, place and work to the desired finish with float or trowel. Allow the new Concrete to set firmly, then keep moist for at least 3 days. Covering the area with a plastic film or damp burlap is recommended.
