A blend of Type 'S' Masonry Cement, Fine Sand and additives to produce an exterior cementitious coating that is ascetically pleasing.
Uses
Parging for Block walls or Poured Concrete.
Features and Technical Data
-
Easily trowels to a smooth finish.
-
Bonds strongly to existing surfaces.
-
Can be used above or below grade.
-
In 66 LB (30KG) BAGS 56 PER SKID
Coverage
A 30kg (66lb) bag will cover 50 square feet to a thickness of 1/8".
Preparation
Remove paint, grease, oil and other foreign matter from area to be resurfaced. Sweep or scrub away all unsound concrete. Flush away residue with clean water. Allow the surface area to remain damp with no standing water prior to application.
Instructions
Empty contents of bag into clean mixing container. Add small amounts of water at a time (4 litres per 30kg bag). Mix thoroughly about 5 minutes. Spray surface to be coated with water to dampen the surface. Make certain the surface stays damp ahead of the application of Parging Mix.
PLACEMENT With a mason’s trowel, scoop up mixture and apply over blocks or wall not more than 3/8" thick. With dampened trowel, go over the Parging Mix to a smooth finish.
