A perfectly proportioned blend of high quality type N' Masonry Cement clean and sharp brick sand.
Uses
Use as a Masonry binder for brick, block and stone.
Suggested Uses Are:
Laying Brick - Setting Block - Tuck Pointing - Barbeques - Parging - Stone Work - Chimney Repair
Features and Technical Data
-
Pre-blended and ready to use - Just add water.
-
Exceeds ASTM C-270 for Type 'N' Mortar when mixed and installed as directed.
-
Backed by Independent Quality Control Tests.
-
IN 66 LB (30 KG) BAGS 56 PER SKID
Coverage
Each 66 lb bag will lay approximately 55 standard bricks or 12 standard blocks with a 3/8 inch mortar joint.
Preparation
All surfaces should be clean and free of oil, gas, paint, grease, etc. before applying Mortar Mix.
Directions
Pour required amount of Mortar Mix into a clean wheelbarrow, mortar-box or similar container. Form a crater in the centre of the dry mix and pour in clear water while mixing with shovel or hoe. Water content should be about 1 quart for every 20 pounds of dry Mortar Mix. Mix to the consistency of a heavy batter.
