A high-quality transformer with touchscreen operation equipped with two jointly controllable lines. Equipped with the following features: Simple touchscreen operation Two jointly controllable line inputs Manual on/off Switching by means of supplied light sensor combined with a timer Equipped with light signal to detect and prevent overloading or faulty installation, for example The motion detector MOVE can be connected as a separately available accessory. The lighting automatically switches on either 1, 3 or 9 minutes upon motion detection.
Specifications
| Article group | Transformers |
|---|---|
| Voltage | 120V |
| Power (W) | 100 |
| Transformer load (VA) | 100 |
| IP rating | IP23 |
| Height (mm) | 67 |
| Length (mm) | 225 |
| Width (mm) | 125 |
Installation
Install vertically using the screws provided. The transformer can be mounted on a wall both inside and outside. When installed outside, the transformer must be at least 50 cm from the ground. See the manual for detailed instructions. For instructions on installing our system and fixtures, watch the instruction videos on the Installation Tips page.
